Make sure Bluetooth is turned on for your device. Unlike typical Bluetooth devices, you do NOT need to pair Bluetooth Smart devices like the WEATHERmeter with your phone. Just start the app, turn on the meter, and it will connect automatically!
Make sure you have the Wind & Weather Meter app installed or another supported application. See how to install the Wind & Weather meter app.
For All Devices:
- Make sure Bluetooth is turned on.
- Verify the WEATHERmeter is connected. This can be done a few different ways:
- First check to see if the main screen of the Wind & Weather meter app is showing a green "Start" button.
- If instead of green "Start" button there is a gray "Not Connected" on the screen, then push the on/off button once. The LED light on the WEATHERmeter might blink a few times before it connects. Once it does connect, there should be the green "Start" button on the screen.
- Try holding down the on/off button on the WEATHERmeter until it flashes. Then, press the on/off button once to turn it back on. It should connect and the "Not Connected" will switch to the green "Start" button.
For Android Devices: Make sure location services are enabled which is necessary to scan for BLE devices!